View LC99063-LF2_388065.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : EN5787
CMOS IC
LC99063-LF2
CCD Digital Signal Processing IC
Overview
The LC99063-LF2 is a color video signal processor for use with the LC9997M/FL.
Package Dimensions
unit: mm 3181B-SQFP100
[LC99063-LF2]
SANYO: SQFP100
Specifications
Absolute Maximum Ratings at VSS = 0 V
Parameter Supply voltage I/O voltage Input voltage Allowable power dissipation Operating temperature Storage temperature Solder resistance (Hand soldering) Solder resistance (Reflow) I/O current Ii, Io Symbol VDD max VI1, VO VI2 Pd max Topr Tstg 3s 10s * For pin type 1 For pin type 2 Conditions Ratings -0.3 to +4.6 -0.3 to VDD +0.3 -0.3 to +7.3 400 -15 to +70 -55 to +125 350 235 20 Unit V V V mW C C C C mA
The pin types above refer to the following groups. (1) DIN[32:9], DEVICE, MIRRO, SUPER, INMODE, WBHL, DOSL, SSET [2:1], OMODE [4:1], RES, DOUT [24:1], HREF, VDO, HDO, CLKOUT, ANA1, ANA2, IREFOT1, IREFOT2, VREF1, VREF2, COMP1, COMP2 (2) DIN[8:1], CLK14M, CLK10M, HDI, VDI, HREF53, ENS, DATAS, CLKS, REGRES *: This value is for a single I/O basic cell.
Allowable Operating Ranges at Ta = -15 to +70C, VSS = 0 V
Parameter Supply voltage Input voltage range 1 Input voltage range 2 Symbol VDD Vin1 Vin2 For pin type 1 For pin type 2 Conditions Ratings min 3 0 0 typ 3.3 max 3.6 VDD +5.3 Unit V V V
(1) DIN[32:9], DEVICE, MIRRO, SUPER, INMODE, WBHL, DOSL, SSET [2:1], OMODE [4:1], RES (2) DIN[8:1], CLK14M, CLK10M, HDI, VDI, HREF53, ENS, DATAS, CLKS, REGRES
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51398RM (OT) No. 5787-1/8
LC99063-LF2 Electrical Characteristics for Logic Circuits DC Characteristics at Ta = -15 to +70C, VDD = 3.0 to 3.6 V, VSS = 0 V
Parameter Input high-level voltage Input low-level voltage Input high-level voltage Input low-level voltage Output high-level voltage Output low-level voltage Input leak current Output leak current Symbol VIH VIL VIH VIL VOH VOL IL Ioz Conditions CMOS level ; for pin type 1 CMOS level ; for pin type 1 CMOS level with Schmitt ; for pin type 2 CMOS level with Schmitt ; for pin type 2 IOH = -2 mA; for pin types 3 and 4 IOL = +2 mA; for pin types 3 and 4 VI = VDD; for pin types 1 and 2 High-impedance output; for pin type 3 -10 -10 VDD - 0.8 0.4 +10 +10 0.75 VDD 0.15 VDD Ratings min 0.7 VDD 0.2 VDD typ max Unit V V V V V V A A
The pin types above refer to the following groups. INPUT (1) DIN [32:9], DEVICE, MIRRO, SUPER, INMODE, WBHL, DOSL, SSET [2:1], OMODE [4:1], RES (2) DIN [8:1], CLK14M, CLK10M, HDI, VDI, HREF53, ENS, DATAS, CLKS, REGRES OUTPUT (3) DOUT [24:1] (4) HREF, VDO, HDO, CLKOUT Note: The ANA1, ANA2, IREFOT1, IREFOT2, VREF1, VREF2, COMP1, and COMP2 pins fall outside these DC characteristic specifications.
Electrical Characteristics for Analog Circuits Recommended operating conditions for D/A converter
Parameter Reference voltage Analog output resistance Reference voltage resistance Phase compensation capacitor VREF capacitor
Symbol VREF1/2 Ra Ri Cc Cv
Conditions
Ratings min typ max 1.11 200 Ra x 4 0.1 0.1
Unit V F F
No. 5787-2/8
LC99063-LF2 Electrical Characteristics for D/A Converter at Ta = 25C, VDD = 3.3 V, Rv = 200 , Ri = 800
Parameter Resolution Conversion frequency Zero scale output voltage Full scale output voltage Linearity error Differential linearity error Reference output voltage 1.09 1.1 -15 1.01 0 1.1 Symbol Conditions Ratings min typ max 8 15 +15 1.19 1.0 0.5 1.11 Unit Bits MSPS mV V LSB LSB V
Pin Assignment
No. 5787-3/8
LC99063-LF2 Pin Functions
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Symbol DEVICE MIRRO SUPER INMODE WBHL DOSL SSET1 SSET2 VDD (DAC-A) VREF2 VREF1 VSS (DAC-A) ANA2 COMP2 IREFOT2 ANA1 COMP1 IREFOT1 VSS (DAC-D) VDD (DAC-D) ENS DATAS CLKS REGRES CKOUT DOUT1 DOUT2 DOUT3 DOUT4 DOUT5 DOUT6 DOUT7 DOUT8 DOUT9 DOUT10 DOUT11 DOUT12 DOUT13 DOUT14 VSS (logic) VDD (logic) DOUT15 DOUT16 DOUT17 DOUT18 DOUT19 DOUT20 DOUT21 DOUT22 DOUT23 DOUT24 RES HREF VDO HDO O O O O O O O O O O I O O O Output Channel2 Output Channel2 = CH2 (MSB) Output Channel3 = CH3 (LSB) Output Channel3 Output Channel3 Output Channel3 Output Channel3 Output Channel3 Output Channel3 Output Channel3 = CH3 (MSB) 0 : Test 1 : Real Horizontal reference VD output HD or C.SYNC output I/O I I I I I I I I P O O P O I O O I O P P I B I I O O O O O O O O O O O O O O O Serial resister enable Serial resister data Serial resister CLK Serial resister reset CCIR601, square PIX mode CLK Output Channel1 = CH1 (LSB) Output Channel1 Output Channel1 Output Channel1 Output Channel1 Output Channel1 Output Channel1 Output Channel1 = CH1 (MSB) Output Channel2 = CH2 (LSB) Output Channel2 Output Channel2 Output Channel2 Output Channel2 Output Channel2 DAC2 output DAC2 bias pin DAC2 reference current DAC1 output DAC1 bias pin DAC1 reference current DAC2 reference voltage output DAC1 reference voltage output 0 : LC9997FL 1 : LC9997M 0 : NORMAL 1 : MIRROR Superimpose control 0 : Superimpose 1 : Camera through Input mode select Auto white balance hold 0 : Hold 1 : Auto Pin 55 output select 0 : HD 1 : C.SYNC Color sampling phase select Color sampling phase select Function
Continued on next page. No. 5787-4/8
LC99063-LF2
Continued from preceding page.
Pin No. 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Symbol OMODE1 OMODE2 OMODE3 OMODE4 HREF53 CLK14M VDI HDI CLK14M VDD (logic) VSS (logic) DIN1 DIN2 DIN3 DIN4 DIN5 DIN6 DIN7 DIN8 DIN9 DIN10 DIN11 DIN12 DIN13 DIN14 DIN15 DIN16 DIN17 DIN18 DIN19 DIN20 DIN21 DIN22 VDD (logic) VSS (logic) DIN23 DIN24 DIN25 DIN26 DIN27 DIN28 DIN29 DIN30 DIN31 DIN32 I/O I I I I I I I I I P P I I I I I I I I I I I I I I I I I I I I I I P P I I I I I I I I I I 8 bit U or UV input 8 bit U or UV input [MSB] 8 bit V input [LSB] 8 bit V input 8 bit V input 8 bit V input 8 bit V input 8 bit V input 8 bit V input 8 bit V input [MSB] 8 bit data input (from LC99053) [LSB] 8 bit data input 8 bit data input 8 bit data input 8 bit data input 8 bit data input 8 bit data input 8 bit data input (from LC99053) [MSB] 8 bit Y input [LSB] 8 bit Yinput 8 bit Y input 8 bit Y input 8 bit Y input 8 bit Y input 8 bit Y input 8 bit Y input [MSB] 8 bit U or UV input [LSB] 8 bit U or UV input 8 bit U or UV input 8 bit U or UV input 8 bit U or UV input 8 bit U or UV input Horizontal reference (from LC99053) FSC4 (LC99053 pin 58), VD (LC99053 pin 56), HD (LC99053 pin 55) or HTCLK (LC99053 pin 51), fixed at high level, C.SYNC (LC99053 pin 54) HTCLK (LC99053 pin 51) Output mode select Function
No. 5787-5/8
LC99063-LF2 Block Diagram
No. 5787-6/8
LC99063-LF2 Major Functions Luminance (Y) signal processing * This block includes an 11-tap low pass filter. * This block includes a gamma correction circuit using a five-segment curve with user-specified data points. * This block provides vertical and horizontal outline enhancement with user-specified gain and coreling. * This block includes a circuit for generating the 1.5x oversampling frequency. Chrominance (U.V, U/V) signal processing * This block uses a 9-tap low pass filter and color matrices to convert YUV input to an RGB signal. * This block includes an auto white balance subblock. -- This subblock contains all circuits necessary for automatic white balance adjustment. -- This subblock offers a choice of automatic or manual operation. -- This subblock supports holding of automatic operation results. -- This subblock offers a choice of seven patterns--one for skin tones, for example. * This block includes a gamma correction circuit using a three-segment curve. * This block uses adjustable linear matrices to convert the color difference signals. * This block includes an adjustable circuit for suppressing color noise at low luminance levels. * This block includes an adjustable circuit for suppressing false-color signals occurring at edges and high-luminance blocks. * This block includes a circuit for generating the 1.5x oversampling frequency. NTSC encoder * This block encodes the RGB data using the timing from the HD, VD, and CLK (14.31818 MHz) input signals. * This block supports color burst phase adjustment. * The pedestal and burst levels are both adjustable. I/O modes * Input modes -- In addition to LC99053 output signals, the chip supports the Y, U, and V input configuration (Y.U.V) and the Y and U/V one (Y.U/V). -- The chip can mix (superimpose) the signals from these two sources. * Output modes -- Digital outputs: Digital composite video, digital Y.C, R.G.B, Y.U.V, and Y.U/V. -- Analog outputs using two 8-bit digital-to-analog converters: Composite video and Y.C Other functions * Registers are accessible via a 3-pin serial interface. * The chip is capable of stand-alone operation. * The chip supports mirror imaging (reversal of left and right). * The chip supports pseudo interlacing. * The chip supports negative imaging (creation of photographic negatives). Important Notes When used in combination with the LC99053-Z28, this chip supports the following modes with field periods longer than 1/60 second: extended exposure, M3, M4, and external ST and FT trigger. In these modes, however, the system requires even more careful evaluation of circuit constants, trigger inputs, and other factors affecting CCD and driver operation. Camera characteristics depend heavily on part layout and circuit design, so follow the guidelines set forth in recommended circuit diagrams issued by Sanyo.
No. 5787-7/8
LC99063-LF2
s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. s Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No. 5787-8/8

▲Up To Search▲

Price & Availability of LC99063-LF2

	To Download LC99063-LF2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .